Tools


Site Explorer

Site Explorer

Atellica NEPH 630 System

Smart, Simple, and Secure Protein Testing

Measuring principleNephelometry; measurement of the scattered light intensity in a fixed angle of 13–24°
MethodsMore than 60 programmed assay protocols
Sample throughputEffective: Approximately 65 tests/hour depending on the assay mix
Nominal: 100 tests/hour
Analysis methodFixed-time kinetics, end-point measurement, VLin Integral
CalibrationMulti-point calibration
Reagent RotorSegments for 3 control serum vials
Segments for 2 reagent vials
Sample RotorSegments for 15 sample tubes
Segments for 7 standard vials
Dilution unit1 frame for max. 96 dilution cups
Size of sample tubesDiameter: 11–16 mm
Height: 65–100 mm
For pediatric samples:
Conical microtubes with a maximum filling volume of 1.5 mL
Bar code readerAutomatic reading of different bar code types: 2/5 interleaved, Codabar, Code 39, Code 93, Code 128
Reagent volume40 μL reagent consumption on average
Sample dilution1:1 to 1:32,000
Level detectionFor samples, standards, controls, reagents, and container for system liquid and waste
Reaction cuvettes90 disposable cuvettes
Measuring temperature37 ± 1.5°C
Light sourceInfrared high performance LED
Wavelength840 ± 10 nm
DetectorPhotodiode with integrated pre-amplifier


Instrument weight and dimensions                                                      

Analyzer dimensions
(W x H x D)
107 x 60 (lids closed) x 63 cm (42.1 x 23.6 x 24.8 in.)
Computer and monitor
dimensions (W x H x D
including keyboard)
Approx. 36 x 46 x 55 cm (14.25 x 18 x 21.5 in.)
Printer§ dimensions
(W x H x D)
Approx. 41 x 27 x 37 cm (16 x 10.5 x 14.5 in.)
Analyzer weight115 kg (254 lb.)
Computer and
monitor weight
Approx. 14 kg (31 lbs)
Printer weightApprox. 7 kg (16.1 lb.)

Room environment
Ambient temperature18 to 32°C (64 to 89°F)
Relative humidity<85% (non-condensing)
Average thermal output404 W in operating mode
Water requirementsDeionized water NCCLS Type 2
Microbial count must not exceed 100 CFU/mL

Electrical installation requirements
Voltage100 V rating: 90 to 110 V
120 V rating: 108 to 132 V
230 V rating: 207 to 253 V
Power consumption500 VA (operating mode)
Host interfacingDownload mode, host-query mode, ASTM
Ports1 10-Base-T/Base TX Ethernet RJ45
1 Serial (DB-9) (male)

Computer and printer
TerminalWindows computer
Printer§Standard laser printer

 

Dependent on model
§Sold separately
Not available for sale in the US. Product availability may vary from country to country and is subject to varying regulatory requirements. Please contact your local representative for availability.

Did this information help you ?
Thank you for your response
We detected numbers and/or an '@' symbol in your comment. Are you trying to enter a phone number or email address so that we may contact you, please contact us via our email form instead.

Note: to get a direct personal response, please contact us via our email form.

Thank you